Gas log install and refurbish in Garland and nearby
Gas logs give you flame without stacking wood. When the set is sized right and burning clean, the fireplace looks finished. When the logs are tired, the embers are gone, or the firebox paint is peeling, the whole hearth looks neglected.
I install Golden Blount gas log sets (made here in DFW) and refresh what you already have: embers, lava rock, and firebox paint. I work in Garland, Richardson, Rowlett, Sachse, Wylie, and northeast Dallas areas like Lake Highlands, Lakewood, White Rock, and Casa Linda.
Install vs refresh
A new install means measuring the firebox, matching a set that fits, and getting the gas connection and controls set up the right way. Golden Blount sets are what I put in when we’re starting fresh or replacing a worn-out unit.
A refurbish is for a set that’s still usable but looks tired. Fresh ember material, lava rock, and a clean coat of firebox paint go a long way. Sometimes that’s all you need. Sometimes the logs themselves are cracked or the burner is done, and replacement is the honest call.
Getting the size right
Logs that are too big crowd the firebox. Logs that are too small look lost and don’t show flame the way they should. I measure the opening (front and back width, depth, and height) before we pick a set.
Controls matter too. Match light, standing pilot, or remote. We’ll talk through what you want to live with day to day, not just what looks good in a photo.
Vented systems and the chimney
Most masonry fireplace gas logs still need a working flue. The chimney has to draft, and the damper setup has to match the log set. A pretty fire on a blocked or damaged flue is a safety problem.
That’s why installs and bigger refreshes usually start with an inspection. If the flue, damper, or firebox needs work first, I’ll say so before we talk about new logs.
What maintenance looks like
Gas logs don’t make creosote like wood, but dust, debris, and nesting still show up in unused flues. Ember beds get thin. Paint wears. Pilots and valves need a look when something feels off.
If the flame looks wrong, you smell gas, or the fireplace hasn’t been checked in years, call before burn season. Small refreshes are easier than ignoring a set until it fails mid-winter.
Garland, Richardson, and northeast Dallas
A lot of east DFW homes already have gas logs in masonry fireplaces. I keep the work on a route I can cover myself.
Rowlett, Sachse, Wylie, Mesquite, and Sunnyvale are included. Ask if you’re on the edge of the map.
Common questions
- What brand of gas logs do you install?
- Golden Blount. They’re made in the DFW area, and they’re the sets I put in for new installs and full replacements.
- Can you refresh my existing logs instead of replacing them?
- Often yes. Ember and lava refresh plus firebox paint can bring a tired set back. If the logs or burner are shot, we’ll talk replacement instead.
- Do I still need my chimney inspected with gas logs?
- Yes. Vented gas logs still use the flue. Animals, debris, and weather damage don’t care that you stopped burning wood.
- Do you install ventless gas logs?
- Call and tell me what you’re after. Fit, clearances, and what your fireplace can safely take matter more than a one-line yes or no on a website.
- What does a gas log install or refresh cost?
- It depends on the set, the controls, and whether we’re refreshing or starting over. Call or text and I’ll walk through options for your firebox.
Want gas logs that look right again? Call or text and we’ll get you on the schedule.